50DCWC102

CompC Woofer: The Kicker 50DCWC102 is a dual subwoofer enclosure loaded with two 10" CompC series subwoofers. The Kicker subwoofers feature a polypropylene cone with a ribbed polyurethane surround. The surround and cone are attached using Kicker's signature yellow double stitching, providing an outstanding bond. Both subwoofer drivers are internally wired in parallel for a 2-ohm load at the terminal cup.

Power: The dual subwoofer enclosure can handle 300W-500W RMS (1000W peak).

Forced Air Cooling: Kicker uses venting slots around the perimeter of the magnet, allowing air to constantly circulate around the motor and maintaining a cooler operating temperature.

Ported Enclosure: The 50DCWC102 ported enclosure is made of heavy-duty MDF (Medium Density Fiberboard) with extensive internal bracing, providing exceptional acoustic efficiency and deep powerful bass. It's covered in sleek black carpeting with yellow embroidered lettering for added protection and a refined look. The ported subwoofer enclosure features a tuning frequency of 35Hz for deep, powerful bass.

Speaker Terminals: A single pair of spring-posts are mounted on the side of the enclosure in a recessed terminal cup, and will accept pin connectors, single banana plugs, or bare wire up to 10-gauge.

• ported enclosure with two 10" CompC subwoofers
• medium-density fiberboard construction covered with carpet
• 2-ohm total impedance
• power handling: 500 watts RMS (1000 watts peak power)
• frequency response: 30-500 Hz
• sensitivity: 98.4 dB
• 28"W x 14"H x 16.5"D1 x 13.63"D2

USER MANUAL